#MOONSHINE THUMPER HOW TO#

The thumper is a double purification unit, it is not a necessity. You are going to need to seal the cap of the pot with “old school” Wheat Paste or Black Electrical Tape, make sure to seal the unit well. Strain Mash for any hard materials and pour into pot.

Visit our accessory page to purchase more items from us.ġ0. There are two different types of Hydrometers, one to use for low proof (of Mash) and one for high proof. You are going to need a Hydrometer, which measures the alcohol content of the Mash, ‘cause it’s always nice to know what your alcohol is in the beginning and the end of the process. VISIT: FOR SOME EASY MOONSHINE RECIPES TO GET STARTED. The goal is to take out as much alcohol out of the mash with your Moonshine Still. The higher the ABV, the more alcohol you will be able to pull out. MASH= Fermented materials that can range anywhere between 1% to 35% ABV (Alcohol By Volume). Mash is what you put in the still to get liquor.ĩ. Once you have a burner and propane you need some MASH. You need a burner or any source of flame, you could also have a submerged heating element.

#MOONSHINE THUMPER HOW TO#

Congratulations! You have successfully assembled your Moonshine Still but you still need to know how to use it.Ĩ. The unit also comes with an adapter piece which is copper, and it connects to the top of right hand side of the thumper and goes to the worm spin fittings accordingly.ħ. When connecting the spin fitting, if they should leak, use thread locking tape or wheat paste. Take the cap and insert it to the top of the pot, the bottom of the cap connects by spinning the spin fittings to the left side of the thumper.Ī) The seam on the top of cap should interlock with seam of the back of the pot.Ħ. Take the worm which is attached to coil and put to the right of the thumper.ĥ. Take the smallest piece of the thumper with drain plug facing towards you and put to the right of the pot.Ĥ.

Place pot on a table with temperature gage towards left hand side.ģ.

Moonshine thumper